List of Top Mechanical Engineering Projects based on Mechanics. These are latest projects for Final Year Engineering Students & Beginners with free PDF downloads and Abstracts.
100+ Mechanics based Mechanical B.E/B.TECH Projects, Project Ideas and Free Downloads:
- Windscreen study using a free moving headform: An investigation of windscreen behaviour when subjected to headform impact
Pedestrian protection performance becomes more and more in focus for the car manufactures and systems to reduce injury risk are under development. A wider understanding of both the present and the future windscreen performance… - Method Evaluation of Global-Local Finite Element Analysis
When doing finite element analysis upon the structure of Saab’s aeroplanes a coarse global model of mainly shell elements is used to determine the load distribution for sizing the structure. At some parts of the aeroplane it is however… - A finite element method for calculating load distributions in bolted joint assemblies
Bolted joints are often the most critical parts with respect to fatigue life of structures. Therefore, it is important to analyze these components and the forces they are subjected to. A one-dimensional nite element model of a bolted joint… - MSC Adams modelling of mechanical system in A400M Crew Entrance Door
Saab Aerostructures has developed the Crew Entrance Door (CED) for Airbus A400M. Airbus has decided some different load cases for which the Crew Entrance Door must be built to withstand without something breaking down… - Design and Fabrication of an Improved Cassava Grater
There is need for the hygienic processing of cassava. Prevalent conditions in the commercial grating areas of this staple food show a susceptibility to food contamination. A home-scale cassava grater was improved on in design and fabrication… - Advanced Model of Acoustic Trim; Effect on NTF Accuracy
The purpose of this project is to implement FEM simulations of poroelastic trim materials into Body-in-Blue models of VCC to increase the prediction accuracy, foresee and overcome possible difficulties during the process and compare… - Growth of Cracks at Rolling Contact Fatigue
Rolling contact fatigue is a problem encountered with many machine elements. In the current report a numerical study has been performed in order to predict the crack path and crack propagation cycles of a surface initiated… - Vibration Modal Analysis of a Deployable Boom Intergrated to a CubeSat
CubeSat or Cubic Satellite is an effective method to study the space around the Earth thanks to its low cost, easy maintenance and short lead time. However, a great challenge of small satellites lies in achieving technical and scientific requirements… - Simulation of Emission Related Faults on a Diesel Engine
Today’s legislation on exhaust gas emissions for heavy duty diesel (HDD) vehicles is more stringent than ever and will be even more tough in the future. More over, in a few years HDD vehicles have to be equipped with OBD (On-Board Diagnostics)… - Experimental Study of Cabin and Engine Mounts and Their Effects on Cabin Noise Pressure
This project investigates engine and cabin mounts of articulated haulers. Experimental study of engine and cabin mounts identifies the structural behaviour of the complicated metal-net elastomeric mounts to isolate driver from noise… - Method Development for Investigation of Real Effects on flow around Vanes
In the development of turbo machinery components it’s desirable to not spend more time than necessary when setting up aero-thermal calculations to investigate uncertainties in the design. This report aims to describe general thoughts… - Energy Savings in a school: Study of the Ventilation and Lighting Systems in the school of Jädraås
The aim of this project is to calculate how much energy could be saved in the School of Jädraås, in the municipality of Ockelbo. The objects of study were the lighting and the ventilation systems, not only because of the energy saving… - Simulation Driven Pre-operative Planning for the Treatment of Hallux Rigidus
The present study utilizes finite element analysis in order to simulate a surgical operation in the treatment of a hallux rigidus case, as designed and developed by Episurf Medical AB (Stockholm, Sweden). The surgical intervention includes… - Moment Balance Of An Axisymmetric Jet And The Effect Of Air Entrainment From Ambient
The momentum flux of turbulent impinging jet is not conserved causing a transfer of momentum between the jet and its ambient, which may result in either increasing or decreasing the momentum flux of the jet. In order to study the nature… - Acoustics of parallel baffles muffler with Micro-perforated panels
Micro-perforated panels (MPP) have a good acoustic damping performance and a potential to be used in mufflers. This project aims to investigate the acoustic performance of a parallel baffles muffler, which consists of MPP baffles… - Spray and Wall Film Modeling with Conjugate Heat Transfer in OpenFOAM
This study was provided by Scania AB. The objective of this thesis was to modify an application in the free Computational Fluid Dynamics software OpenFOAM to be able to handle spray and wall film modeling of a Urea Water Solution together… - Automatic Trimmerhead
Automatic trimmerhead is an examination project for making an automatic trimmerhead for grass trimmers with the user and functionality in focus. Our perception is that a happy user is a user who can pick up his or her trimmer… - Design and Fabricate Multipurpose Portable Desk
The study of manufacturing was very important in order to carry out this project to ensure that the student understand on what are needed to do. This project is about designing and fabricate “Multipurpose Portable Desk” to help people easy to bring anywhere… - Development af a Program to Determine Hidden Performance Parameters of a Gasturbine
Gas turbines overall theoretical performance analysis can be performed by using several thermodynamic theories and equations with the help of design parameters. However, limited availability of the design parameters will complicate the analysis… - Modelling & implementation of Aerodynamic Zero-lift Drag into ADAPDT
The objective of this project work was to construct and implement an algorithm into the program ADAPDT to calculate the zero-lift drag profile for defined aircraft geometries. ADAPDT, short for AeroDynamic Analysis and Preliminary Design Tool… - Crack Propagation in Cruciform Welded Joints: Study of Modern Analysis
This study is investigating how the effective notch method can be used for fatigue assessment of welded joints. The effective notch method is based on a finite element analysis where the joint is modeled with all notches fictitiously rounded… - Impingement Cooling: Heat Transfer Measurement by Liquid Crystal Thermography
In modern gas turbines parts of combustion chamber and turbine section are under heavy heat load, for example, the rotor inlet temperature is far higher than the melting point of the rotor blade material. These high temperatures… - Aerodynamic Loads on External Stores – Saab 39 Gripen: Evaluation of CFD methods for estimating loads on external stores
External stores mounted on aircraft generate loads which need to be estimated before first takeoff. These loads can be measured in a wind tunnel but since the possible store configurations are basically endless, testing them all is neither economically… - Evaluating new Pilot Stage Concept
This report is a first practical study of micro valves for hydraulics, manufactured by Microstaq Inc. who uses, for hydraulics, new materials and new actuating technologies. The purpose is to evaluate if, in the future, there is any possibility… - Design, Verification and Manufacturing of a New Binding System for Crampons
Crampons are a device composed of a framework containing prongs, a front-part binding and a rear-part binding system that are attached to the boots in order to climb through steep walls covered by ice, snow or rocks… - Sound Classification of Space in Buildings
On account of LN Akustikmiljö AB, the sound energy absorption of various rooms was estimated using two methods; by measuring the steady-state sound pressure levels in the rooms when excited by a reference sound source and by measuring… - Measurement evaluation and FEM simulation of Bridge Dynamics
The aim of this project is to analyse the effects of train induced vibrations in a steel Langer beam bridge. A case study of a bridge over the river Ljungan in Ånge has been made by analysing measurements and comparing the results… - Development and Optimization of Synthetic Jets for Active Flow Control
The goal of the project is to simulate and analyze the near C-130 Hercules flow field and then evaluate the influence of passive and active flow control method. This carrier aircraft has been extensively used and is essential while cargos… - Mechanical Properties of Materials made of Nano-cellulose
Recent experimental findings have demonstrated great mechanical properties of nanopaper compared to ordinary paper. In this work, we have studied the formation of the elastic modulus of paper. Our goal was to investigate the contribution… - VEVA Multifunctional Spindlering
Our thesis is made in collaboration with Autoliv Sweden and the department Global Development Seatbelt in Vårgårda. Autoliv was founded in 1953 by two brothers from Vårgårda. Since then, they have become world leading in automotive… - Aerodynamics of Flutter
The unsteady ow around an aerofoil placed in a uniform ow stream with an angle of attack is investigated, under the assumption of inviscid, incompressible, two-dimensional flow. In particular, a function of the velocity jump… - Robust Repair Methods of Primary Structures in Composite
A request of material change when performing repairs on composite parts of SAABs JAS 39 Gripen has lead to the initiation of this project. The aim is to create a quicker and more robust repair… - Modular Locking System to RBS Cabinet
Radio base stations contain equipment which enables the use of cell phones all around the world. ERICSSON is developing these stations and everything connected to the area, such as electronics, software and hardware. In a new project ERICSSON… - CFD Measurements of the Cooling Air in a DC-Motor
The cooling system of a DC-motor is examined in this thesis. A change of direction of the cooling air is desired to prevent the generated coal dust from entering into the windings of the machine. Ultimately this will have a negative effect… - Simplified Finite Element Bearing Modeling: With Nx Nastran
This report was produced at the request of ABB Robotics and the work was conducted at their facilities in Västerås, Sweden. In the development of industrial robots the structures are slimmed to increase the accuracy and speed… - Vibro-acoustic analysis of a satellite reflector antenna using FEM
The acoustic environment generated during launch is the most demanding structural load case for large, lightweight satellite reflector antennas. The reflector is exposed to extremely high sound pressure levels originating from the structural… - Evaluation of a New Measurement Method for Tire/Road Noise
Noise is a growing health concern as urban residents increases rapidly and more reports of noise causing sleep disturbances and increasing the risk of cardiovascular health problems are published. Noise has a negative influence on life quality… - Evaluation of an Interphase Element using Explicit Finite Element Analysis
A research group at University of Skövde has developed an interphase element for implementation in the commercial FE-software Abaqus. The element is using the Tvergaard & Hutchinson cohesive law and is implemented… - Parametric Ram Air Channel Model for Flow Optimization
Ram air channel or NACA channel is used to direct the ambient air for various purposes in an aircraft, such as pressurizing the cabin or as a coolant to heat exchangers and even more other applications like a cooling of the coolant… - Investigation of Film Cooling Strategies CFD versus Experiments-Potential for Using Reduced Models
The ability and efficiency of today’s gas turbine engines are highly dependent on development of cooling technologies, among which film cooling is one of the most important. Investigations have been conducted towards discovering different aspects of film… - Nutrient Driven Topology Optimization
The aim of this study is to investigate how a biological structure changes its shape and boundary under different cases of load if flow of nutrients is included, since nutrient flow has not been taken into account in previous studies… - Analytical and Numerical Analysis of the Acoustics of Shallow Flow Reversal Chambers
Flow reversal chambers are mainly used to accomplish a compact silencer design needed on a vehicle. Generally in this configuration the inlet and outlet ports are on the same face and the flow direction is reversed… - Simulation of Thermal Stresses in a Disc Brake
The heat flux produced from the friction between a disc and pad system leads to a high temperature which causes thermal stresses in the disc and after a number of repeated braking cycles, cracks might be initiated… - Simulating a tensile test of a carbon fiber composite test specimen in ABAQUS
This work aims at providing a numerical tool for the efficient design of the multidirectional carbon fiber reinforced composite material by means of finite element simulations. Abaqus/ CAE v 6.9-1 software has been used to establish… - Geometry-dependence of the adhesive strength of biomimetic, micropatterned surfaces
Pressure sensitive adhesive surfaces are often inspired by nature. Miming the toe-surface of gecko, engineered surfaces made of thousands of micro-pillars show promising adhesive properties. This surfaces, covered with cylindrical pillars… - Study of Temperature Raise in Gavleån River related to District Cooling
This project is a preliminary study in order to build a small power plant, located beside to Gavleån River. It has been designed with the aim of cooling a district of Gävle city, Sweden. That big project is carried out by the international consulting engineering company SWECO… - Design and Modeling of a Piston Accumulator for a Rock Drill and its Fatigue Strength
This project deals with performance improvement of hydraulic rock drill machine manufactured by Atlas Copco Rock Drills. Atlas Copco Rock Drills AB is a world leading supplier of percussive rock drilling equipment for surface and underground… - Mechanics of Optimal Rowing
The forward dynamic approach is different from the inverse dynamic one, and could set up the relation between the angles and controls. The author tries to analyze the optimal rowing movement patterns between the catch… - Hydraulic Regenerative System for a Light Vehicle
The project is based in a constructed light vehicle that must be improved by adding a hydraulic energy recovery system. This vehicle named as TrecoLiTH, participated in the Formula Electric and Hybrid competition (Formula EHI) 2009 in Italy… - Maintenance Program Development and Import/Export of Aircraft in USA
This study discuss how United Parcel Service (UPS) develop its aircraft maintenance program after import of McDonnell Douglas MD-11aircraft and the process of exporting newMD-11 aircraft from manufacturer in USA to European operator… - Concept design of an Ultra-light Industrial Robot
The use of industrial robots are increasing in areas such as food, consumer goods, wood, plastics and electronics, but is still mostly concentrated in the automotive industry. A problem is that workstations in smaller and medium… - EU Energy Situations and Supply Security
Energy supply security is a hot topic today. It highly influences energy market, national security and also residents’ daily lives. However, due to different aims and study strategies, definitions of energy supply security are different… - Effect of Temperature on Mechanical Response of Austenitic Materials
Global increase in energy consumption and global warming require more energy production but less CO2 emission. Increase in efficiency of energy production is an effective way for this purpose. This can be reached by increasing boiler temperature… - Improvement of finite element spot weld models for structural dynamics
The ACM 2 spot weld model is the currently most widely used spot weld model in industry. It is designed to be tuned using parameters to represent the stiffness characteristics of a spot weld in a suitable way. The choice of these parameters… - Validation and integration of a Rubber Engine Model into an MDO environment
Multidisciplinary design optimization (MDO) is a technique that has found use in the field of aerospace engineering for aircraft design. It uses optimization to simultaneously solve design problems with several disciplines involved… - Linear Acoustic Modelling and Testing of Exhaust Mufflers
Intake and Exhaust system noise makes a huge contribution to the interior and exterior noise of automobiles. There are a number of linear acoustic tools developed by institutions and industries to predict the acoustic properties of intake… - Simulation and Modal Analysis of Instability and Transition in a Steady Eccentric Stenotic Flow
Direct numerical simulation (DNS) of steady flow, with Re = 750 at inlet, through stenosed pipe has been done to study transition and turbulence of the flow in the post-stenosis area. The pipe has 75% constriction by area reduction… - CFD Measurements of the Cooling Air in a DC-Motor
The cooling system of a DC-motor is examined in this study. A change of direction of the cooling air is desired to prevent the generated coal dust from entering into the windings of the machine. Ultimately this will have a negative effect on the cooling in the machine… - Electronic Pump Control and Benchmarking of Simulation Tools: AMESim and GT Suite
Load sensing pumps in hydraulic system of wheel loaders helps in increasing the energy efficiency of wheel loaders. Present day machines have hydro mechanical load sensing system. After the advent of hydro mechanical load sensing concept, over the years, lots… - EHD Enhanced Heat Transfer in a Metallic and a Ceramic, Compact Heat Exchanger
Electrohydrodynamic (EHD) heat transfer enhancement has enormous potential to increase heat transfer rates while minimizing heat exchanger size. The aircraft industry, for one, could benefit using EHD heat transfer enhancement… - Analysis of the Z-wing configuration
This project will analyze the Z-wing configuration. The Z-wing configuration is basically an airplane that has one of the wings placed at the forward section of the fuselage and the other wing placed on the other side far aft at the fuselage… - Analysis and Design of a Semi-Active Muffler
In this work, a flow reversal resonator fitted with a short-circuit duct connecting the inlet and outlet is analysed and used as a tuneable muffler element, aimed to be used use in a semi-active muffler on an IC-engine… - Optimization as a Thermodynamic System
As we know that nature made the things optimized in all point of views, also it is supposed that nature works under some evolutionary process. Since there was no such Evolutionary Structural Optimization (ESO) method having strong mathematical… - Assessment of the applicability of XFEM in Abaqus for modeling crack growth in rubber
The eXtended Finite Element Method is a partition of unity based method, particularly suitable for modelling crack propagation phenomena, without knowing a priori the crack path. Its numerical implementation is mostly achieved… - Finite Volume Simulation of Fast Transients in a Pipe System
The MUSCL-Hancock finite volume method with different slope limiters has been analyzed in the context of a fast transient flow problem. A derivation and analysis of the axial forces inside a pipe system due to a flow transient is also performed… - Evaluation of COMSOL Multiphyscis for Rotordynamical Analysis
Rotary machinery systems are widely used in different industries. As they have rotational movements, the resonances will be the function of rotational speed. Nowadays, there are different CAE (Computer Aided Engineering)… - Experimental study of Complex Pipe Flow
Turbulent pipe flows are prevalent in industrial applications. Despite a large body of experimental and more recently numerical investigations there are still unresolved fundamental issues. Among those are the scaling of the mean velocity… - Design of Parametric Winglets and Wing tip devices: A Conceptual Design Approach
Winglets being a small structure play an important role in reducing the induced drag in aircraft. Many types of winglets have been designed and their significance in reducing the drag is published. One of the main objectives… - A CFD Investigation of a Generic Bump and its application to a Diverterless Supersonic Inlet
This is a study done at the Swedish Defence Research Agency with the purpose to design and investigate how different geometries of a compression surface integrated with an intake affects the performance such as distortion… - Instabilities in Pulsating Pipe Flow of Shear-Thinning and Shear-Thickening Fluids
In this study, we have considered the modal and non-modal stability of fluids with shear-dependent viscosity flowing in a rigid straight pipe. A second order finite-difference code is used for the simulation of pipe flow in the cylindrical… - Simulations of Sound Propagation at a Duct Termination with flow
Both theoretically as well as in many applications like exhaust systems, ventilation pipes, mufflers, air intakes and also large scale industrial smoke stacks, it is of interest to understand how sound waves are scattered at duct exists… - Evaluating new Pilot Stage Concept
This report is a first practical study of micro valves for hydraulics, manufactured by Microstaq Inc. who uses, for hydraulics, new materials and new actuating technologies. The purpose is to evaluate if, in the future, there is any possibility… - Gearbox Housing Topology Optimization With Respect To Gear Misalignment
Structural topology optimization methods have existing and been improving theoretically since 1980s; however, in industry, with respect to the certain conditions, proper modification is always desired. This study develops a specific method… - Analysis of Metal to Composite Adhesive Joins in Space Applications
Within the European space program, a new upper stage engine (Vinci) for the Ariane 5 launcher is being developed, and the Volvo Aero Corporation (VAC) is contributing with turbines for the fuel turbo pumps. This study investigates the possibility…
>> Mechanics based Mini Projects for Mechanical Students
>> Mechanics Projects for Final Year Students
>> More Final Year Projects for Mechanical Engineering Students
>> More Mechanical Mini Projects for Final Year Students