This study analyzes the performance of variable capacity heat pump scroll compressor which is equipped with vapour injection and permanent magnet motor. Refrigerant used in the system is R410A. The study is divided in two phases. In first phase, tests are Continue reading
Get Latest Final Year Mechanical Projects in your Email
Design & Development Projects
Feasibility Study for Upgrading the Current Heat Distribution Network of an Existing Building Complex to a Smart Thermal Grid
A feasibility study on upgrading an existing heat distribution network to a low-temperature distribution grid has been carried out during this project. The integration of a solar thermal system combined with a borehole thermal energy storage (BTES) for covering the Continue reading
High Flying, Electrifying: Assessment and Extension of a Kite Model for Power Production
This thesis has its starting point in an existing computer model of an electricity generating kite, from Heidelberg University. The modelled kite has Continue reading
Feasibility Study of a Virtualpower Plant for Ludvika
This thesis is a feasibility study of a virtual power plant (VPP) in central Sweden and part of a project with InnoEnergy Instinct and STRI. The VPP consists of a wind park, small hydro plant as well as Continue reading
Development of New Lifting Equipment for VPA Plates
This project explores how to develop new lifting equipment for the membrane and filter plates of the VPA (Metso) machine satisfying all the safety requirements. The VPA is a heavy duty machine with Continue reading
Fine-grained Simulation in the Design of Automotive Communication Systems
Early in the design cycle, the two main approaches for verifying timing constraints and dimensioning automotive embedded networks are worst-case schedulability analysis and simulation. The first aim of the paper is to demonstrate that both provide Continue reading
Development af a Program to Determine Hidden Performance Parameters of a Gasturbine
Gas turbines overall theoretical performance analysis can be performed by using several thermodynamic theories and equations with the help of design parameters. However, limited availability of Continue reading
Development of Software That Can Predict Damper Curves on Shock Absorbers
This project features the development of a software program with a plot function (a setting bank) for data curves, obtained when car dampers are tested in a dynamometer, which measures forces at given velocities. Advanced dampers have many different adjusting possibilities and it was desired to collect Continue reading
Control Rod Effect at Partial SCRAM: Upgrade of Plant Model for Forsmark 2 in BISON After Power Uprate
This study aims to improve the modeling of partial SCRAM in the BISON plant model for the Forsmark 2 nuclear reactor after power uprate. Validation of the BISON model against tests performed from March to May in 2013 have shown that Continue reading
Solar Absorption Refrigeration System Using New Working Fluid Pairs
Absorption refrigeration systems powered by solar energy increasingly attract research interests in the last years. In this study, thermodynamic analyses for different Continue reading
Investigation of New Heat Exchanger Design Performance for Solar Thermal Chemical Heat Pump
The emergence of Thermally Driven Cooling system has received more attention recently due to its ability to utilize low grade heat from engine, incinerator or simple flat plate solar collector which are considered as Continue reading